Multi touch foil/ film package: tube package, size will depend on the film size you ordered
CapacitiveMulti Touch foil/film
Start from 15inch-120inch, Support10 touch points
TEST & Installation of TOUCH FOIL
TOUCH TABLE TEST
INSTALLATION OF TOUCH FOIL
Multi touch foil/film is a newly developed and completely transparent foil, it can be attached on the back of glass, clear acrylic and any other non-metallic flat board, a big interactive touch screen would be created. Available in standard and widescreen sizes from 15''up to 120''(16:9,16:10 or 4:3) diagonal,customized size touch foil touch screensare available upon request.
A complete foil contains the following 3 parts:
1. PET sensor film, which seal the conductive nano-wires.
2. Control circuit board and protection cover with USB cable.
3. Software Driver For Calibration.
• Wide range of screens sizes available Support with Windows 7/8 , Android and Linux. • Compatible with all LCD displays and with Projectors using rear projection film • 10 touch points flexible touch • Suitable in high ambient light • Vandal & shock resistant • Single cable for power & connection • Easy to clean • Long life expectancy • The multi touch foil can be stuck on any glass or acrylic surfaces • Robust through glass Multi touch detection • Select from sizes between 15" to 120" diagonal. Custom sizes on request • Preloaded ready to use applications which you can easily customize
1, Touch Kiosk ( smooth touch in whole surface)
2, Touch table ( smooth touch in whole surface)
3, Exhibition booth display
4, Shop window( Film inside, no worry about safety)
5, Company Meeting Room or Front Door
Q:What the Touch Foil it is?
A: It's an innovation core part of touch screen, support single-touch & multi-touch. Holographic, precision ,transparent,flexible,curve-able,water-proof,contamination-proof, only hands-touch valid, especially unique touch technology in outdoor application. It's a magical product.
Q:What OS you support?
A: The Touch Foil support Windows XP/ 7/ 8, Linux, include 32 bit & 64 bit system and Android.
Q:How can I use this amazing product? A: Laminate on the back of glass, connect and then plus the USB interface to your PC, config the driver, then you can use it. Very easy and simple for using, once config completed, you can use it as easy as iPad . We also have video guide of lamination and driver config.
Q: How many points your multitouch support?
A: So far, 2 points, It's true multitouch and we will support 10 more points in not far future.
Q:How many kinds of your Touch Foil?
A: We have 2 kinds Touch Foil. Permanent version: tackiness Adhesive Type use for Kiosk, include Digital Signage, POS, etc. It can be attached to glass and most smooth non-metallic surfaces other than Acrylic/Polycarbonate.
Cling Filmv ersion: Vacuum adhesion Adhesive Type Rear projection displays.. It can be attached to glass/Bomb proofed Windows
Q:How's the handwriting performance?
A: The Touch Foil have best-in-class handwriting performance, high speed and good linearity.
Q:I found your controller board are detachable, what's the advantages?
A: The Touch Foil have 3 core parts, each are Touch film - Sensor, Controller board, Driver - Software, we use module-design method. the main advantages of detachable is that when you laminate the Touch Foil on glass, no need to think about water-proof of Controller board, also when the Controller board broken, you can easily replace by a new board. your maintenance would be easy and cost down.
Q:What solution you provide?
A: We provide many solutions to our partners; include all-in-one touch device, magic touch window, mirror touch, touch table, touch Kiosk, touch Digital Signage, interactive projection, touch wall, interactive ground, and so on.
Q:For magical touch window, I found the big PC and Power on/off is a tough problem, any solution?
A: Yes, you need to find a safety and free space for your big PC, also power on/off every day. If you use ProControl, you can solve these problems. ProControl is a small size & remote-able industrial PC, locate the ProControl on the top of ceiling. or just hang-up on the wall, power on/off by the remote. It would make you easily use Magic touch window. just like switch on/off something.
Q:The length of USB is only 10M valid, the distance between my control center and thru- glass touch screen is far more than 30M. any solution?
A: Yes, we have verified USB extender for your long distance application.
Q:About digital signage application, How about the distance between LCD and Touch Foil?
A: Depends on different LCD manufacturer, some are minimum 1mm, some are 5mm, others are 8mm, even more. The display card of LCD is the key noise, so select a best display card of LCD is important. in accord of our experience, the display card provide by big manufacturer is better. a test is necessary before your LCD application.
Q:How about software application?
A: We have many software application partners, they can provide customizing software application service. Also we have a Software Platform - SWPF, It's a general application platform, the standard version is free. you can customizing the touch UI and contents by yourself. If you want details, please contact with our sales.
Q:For safety, we use thru-glass touch, how about sound?
A: The Resonant Sound is a proper solution.
Q:Can I connect two Touch Foil to one PC?
A: No, the Touch Foil will not work. Because Touch Foil touch is USB auto-detective. Two Touch Foil will make driver confusion.
Q:I found the noise is big, when I integrated Touch Foil with LCD, How can I get rid of the noise?
A : 1st, you can connect the Touch Foil with the ground wire, so as to get rid of static electricity. 2nd make the gap between LCD and the Touch Foil much more. 3rd make sure that the lamination-substrate is glass not others. Transparent plastic is OK, but gather static electricity function is strong, so, it's not a stable substrate.